en

I-PEX 83037-100B-01-D 40P high-speed signal transmission ultra-thin coaxial cable replacement

Categorization:Harness Component       

Specializing in the sales of: Connectors | Wire Harness | Cable Products

A 40Pin ultra-fine coaxial cable assembly solution for high-density and high-speed connections

In notebook computers, tablets, display modules, cameras, VR/AR devices, and other space-limited electronic products, internal wiring harnesses must not only meet signal transmission requirements but also take into account design requirements such as volume, bending space, connector size, and EMI. For such applications, our company specializes in the production and manufacturing of extremely fine coaxial cable assemblies. We can develop compatible alternative solutions that match international brand series products according to customer equipment structure, connector specifications, pin count, cable specifications, and length requirements. This time, the product model introduced is I-PEX 83037-100B-01-D, which corresponds to the CABLINE-UA II series 40Pin, 44AWG Micro-Coaxial cable assembly solution, with a structure of 100mm length and 1-1 termination form; the official I-PEX product page also lists 83037, 83038, and 83039, which correspond to 40Pin, 100/200/300mm 1-1 cable assembly solutions respectively. For engineers, the core value of such products lies in achieving high-density routing of multi-channel signals through extremely fine coaxial structures, while at the same time matching with miniaturized connectors to meet installation requirements in limited internal spaces of the equipment; for purchasing personnel, it is possible to directly screen alternative suppliers based on key conditions such as original material number, pin count, cable AWG, cable length, and connectors. Our company can provide: I-PEX 83037-100B-01-D compatible alternative extremely fine coaxial cable assembly solution, suitable for domestic substitution of existing I-PEX series cable assemblies, second supplier introduction, and customized development.

I-PEX CABLINE-UA II_20497极细同轴线束


Why choose 44AWG? Consider signal, space and reliability comprehensively.

44AWG is an important specification parameter of this ultra-fine coaxial cable assembly, and it is also a key condition that engineers cannot ignore when selecting alternatives. According to the official data of I-PEX CABLINE-UA II, this connector platform supports AWG42, AWG44, AWG46, and other Micro-Coaxial cable specifications, among which AWG44 corresponds to a reference rated current of 0.19A/contact. At the same time, this connector uses a 0.3mm Contact Pitch, Vertical Right Angle structure, Mated Height of 1.27±0.1mm, and provides different signal quantity solutions such as 26, 32, 40, 50Pin. This I-PEX 83037-100B-01-D model uses 44AWG ultra-fine coaxial wire and is equipped with the cable end connector 20497-040T-30. Therefore, when performing compatibility alternatives, one cannot simply look at the "40Pin" condition, but also needs to focus on verifying parameters such as 44AWG wire, coaxial structure, characteristic impedance, wire diameter, termination method, wire length, cable exit direction, and connector components. Especially for high-speed signal applications, ultra-fine coaxial cable is not simply making ordinary wires thinner, but requires overall matching from aspects such as impedance control, signal integrity, shielding structure, and termination technology. For procurement personnel, if only according to the "40Pin cable assembly" to inquire, it is easy to get products that look similar but do not match the electrical or mechanical parameters completely. Therefore, it is recommended to clearly state information such as I-PEX 83037-100B-01-D, 40Pin, 44AWG, connector 20497-040T-30, 100mm, and 1-1 structure when inquiring, in order to improve the accuracy of supplier quotations and samples.

I-PEX 83037-100B-01-D极细同轴线束


How to choose different schemes for ultra-fine coaxial cable束 with different Pin numbers? 40 Pins is not the more, the better.

In actual product development, the finest coaxial cable assembly is not about having more pins; it should be determined comprehensively based on the required signal quantity, PCB space, connector size, wiring space, and future expansion needs. The CABLINE-UA II series offers solutions with 26Pin, 32Pin, 40Pin, and 50Pin options, and the official documentation lists the corresponding cable assembly models, allowing engineers to choose according to actual signal channel requirements. If the device only needs a small number of high-speed or high-frequency signals, the 26Pin solution can be prioritized to reduce connector space; as the signal quantity increases further, 32Pin can be chosen; if multiple signals such as display, camera, data, and control need to be connected together, the 40Pin solution is more suitable for high channel density applications. The I-PEX 83037-100B-01-D introduced this time is a representative solution with 40Pin, 44AWG, 100mm, and 1-1 structure; when the system requires more signal channels, the 50Pin solution can be further considered. It should be especially noted that the change in pin count not only means "more wires" but also affects the connector width, PCB pad area, overall cable assembly size, and internal wiring of the device. Therefore, engineers are recommended to make judgments according to the logic of "actual signal quantity → reserved channels → PCB space → cable routing → connector matching → high-speed signal performance" when selecting. Purchasers can use the original manufacturer's pin count and specific material number as the basis for technical confirmation from alternative suppliers. For devices already using the CABLINE-UA II 40Pin solution, our company can carry out compatible development around the original structure and can further provide customized solutions for ultra-fine coaxial cable assemblies with different pin counts such as 26Pin, 32Pin, and 40Pin according to the actual needs of customers.

极细同轴线束(004)


Four, selection and compatibility with reference and suggestions - quickly find a suitable alternative solution from the original part number

For customers who are engaging in domestic substitution, cost-reduction procurement, or second supplier certification, it is recommended not to use "ultra-fine coaxial cable" as the procurement name alone, but to establish complete matching conditions for the model. The core identification information for this product is: I-PEX material number/model: I-PEX 83037-100B-01-D; connector model: 20497-040T-30; wire specification: 44AWG; pin count: 40Pin; cable length: 100mm; termination structure: 1-1. The official model information of I-PEX also clearly lists 83037-100B-01-D as 40Pin, Micro-Coaxial, 44AWG, L=100mm, 1-1 structure, while the same series 83038 and 83039 are 200mm and 300mm solutions respectively. Therefore, if the customer is currently using the 83037 model, it is recommended to prioritize one-to-one technical verification according to the above key parameters; if the actual wire length of the original equipment is different, further matching can be performed according to dimensions such as 200mm, 300mm, etc.; if the number of device signals changes, the 26Pin, 32Pin, 40Pin, or 50Pin solutions need to be reconfirmed, and cannot be simply replaced by increasing or decreasing the number of cores. For domestic substitution projects, our company can conduct technical verification, sample making, and compatibility substitute development based on the original factory material number, connector model, pin count, AWG, impedance, wire length, termination method, wire exit direction, and product drawings provided by the customer. Our company can provide I-PEX 83037-100B-01-D compatible substitute cable solutions to help customers find a stable supply solution for ultra-fine coaxial cable while maintaining the original equipment connection structure and application requirements.

极细同轴线束生产商(12)


The selection of extremely fine coaxial cable assemblies is not merely about comparing prices, but also requires attention to Pin count, AWG specification, connectors, impedance, size, termination technology, and signal performance; only when these key parameters are reasonably matched can one truly move from "model substitution" to "reliable application substitution."

I am[7A Electronic Network],Can provide structural optimization and signal consistency evaluation services and product solutions for high-speed ultra-fine coaxial cable assemblies. For more information, please contact: Manager Zhang18913228573 (WeChat same number).