3M 9QN0-114-22-1.00 High-Speed DAC Cable Replacement

In data centers, high-performance computing (HPC), and high-speed network equipment, high-bandwidth, low-latency connection solutions are crucial. The 9Q series high-speed DAC cable components launched by 3M are widely used for high-speed interconnection between servers, switches, and storage devices. Among them, the model 9QN0-114-22-1.00 is a typical 100G QSFP28 direct-attach copper cable (DAC) component. With stable signal integrity, good flexibility in wiring, and high cost-performance, it has become one of the important solutions for short-distance high-speed interconnection in data centers.

One, 3M 9QN0-114-22-1.00 product features and technical parameters

9QN0-114-22-1.00 belongs to the 3M 9Q series high-speed cable assembly, which adopts a Twin Axial dual-axial cable structure and can achieve high-speed signal transmission while effectively reducing crosstalk and signal loss. Its main technical features include:

QSFP28 Plug to Plug

• Transmission Rate: Up to 100Gbps (4×25Gbps)

• Cable Type: Flat Twin Axial Copper Cable

• Ruler: 30 AWG

  Length: 1.00 m

• Position numbers: 38 positions

• Shielding structure: Full shielding design, enhancing anti-interference capability

Latch Lock, with Pull Tab design

  Working temperature: 0℃ ~ 70℃

Application scenarios: server interconnection, switch connection, high-speed transmission within data center racks

This series of DAC cables adopts a flexible flat structure design, which can achieve a smaller bending radius and reduce the space occupied by cabling inside the cabinet. At the same time, it is conducive to improving the air flow and heat dissipation efficiency inside the cabinet, suitable for high-density network equipment environments.

Section 2: Selection, Compatibility, and Alternative Solutions Reference and Recommendations

In the design of high-speed network cabling solutions, the selection of DAC cables typically needs to consider interface standards, transmission speed, cable length, wire gauge, and system compatibility. For the application of 9QN0-114-22-1.00, the following selection and alternative suggestions can be referred to:

Interface and protocol compatibility

Ensure that the device port supports QSFP28 interface standard

  Compliant with 100GBASE-CR4 / IEEE 802.3bj / SFF-8661 and other high-speed protocols

Length matches ruler

• 30AWG cable is typically used for short-distance connections of 2 meters or less

If the distance is longer, you can choose the 26AWG version of the DAC cable.

3. Typical Application Matching

• Server ↔ Top-of-Rack switch

  Switch ↔ Switch

Data center high-density rack internal interconnection

4. Domestic Substitute and Compatibility Solution Suggestions

In practical projects, the following principles can be followed to select domestic alternative solutions:

Interface compatible with EEPROM protocol: Ensures compatibility with mainstream switch manufacturer system identification

Cable structure consistency: Twinax DAC structure is consistent with QSFP28 interface standard

Electrical performance matching: meets 100G signal integrity, insertion loss, and crosstalk specifications

Mechanical structure consistency: plug-in structure, buckle, consistent length specifications

Through matching the above key parameters, an alternative solution with functional compatibility, stable performance, and cost optimization can be achieved, suitable for data center construction and equipment upgrade scenarios.

3M 9QN0-114-22-1.00 is a typical 100G QSFP28 DAC high-speed cable assembly, with advantages such as high structural flexibility, good signal integrity, and high wiring efficiency. It is widely used in server, switch, and data center high-speed interconnection scenarios. Against the backdrop of the continuous growth in demand for high-speed network equipment, a stable and reliable alternative solution can also be achieved through reasonable selection and compatible design, thus effectively optimizing the overall cost while ensuring performance.

We have been focusing on the research and application of domestic alternatives for this brand's high-speed connectors and cable assemblies for a long time. If you are looking for related alternative products, evaluating compatibility solutions, or have procurement needs, please contact: Manager Zhang 18665383950 (WeChat number). Look forward to in-depth communication with more industry partners to jointly promote the development of high-speed interconnect solutions.